More than just Technology

Kemarin kita sudah coba config rouer sisco sampe Config IP adress, nah sekarang kita lanjut lagi ke. . .mana yah? Routing Static kali yah???
Ok, kita langsung aja ke Routing Static

Rumusnya kaya gini :
ip route (network tujuan) (netmask ip tujuan) (ip next hop)

Contoh:
Misalnya, kita punya 2 Router;
Router1 =
Fa0/0 : 10.8.8.254 255.255.255.0 >> gateway LAN1
Serial 2/0 : 172.16.48.1 >> DCE

Router2 =
Fa0/0 : 10.9.9.254 255.255.255.0 >> gateway LAN2
Serial 3/0 : 172.16.48.2 >> DTE

Cara configurasi di router1
============================================
ikmal-rt1#conf t
ikmal-rt1(config-if)#ip route 10.9.9.0 255.255.255.0 172.16.48.2
ikmal-rt1(config-if)#
============================================

config di router2
============================================
ikmal-rt2#conf t
ikmal-rt2(config-if)#ip route 10.8.8.0 255.255.255.0 172.16.48.1
ikmal-rt1(config-if)#
============================================

Selesai deh,,,
liat hasil configurasi, ketik aja show-running config
============================================
ikmal-rt1#
ikmal-rt1#show-running config
Building configuration...

Current configuration : 695 bytes
!
version 12.2
no service password-encryption
!
hostname ikmal-rt1 //--> Host Name yg kita buat
!
!
enable secret 5 $1$mERr$A0ScdRDjofkX52ZEbhYgd0 //--> password enable (secret)
!
!
!
!
ip ssh version 1
!
!
interface FastEthernet0/0
description opr-71
ip address 10.8.8.254 255.255.255.0 //--> IP address pada Fa0/0 yg kita buat
duplex auto
speed auto
!
interface FastEthernet1/0
no ip address
duplex auto
speed auto
shutdown
!
interface Serial2/0
no ip address
shutdown
!
interface Serial3/0
no ip address
shutdown
!
interface FastEthernet4/0
no ip address
shutdown
!
interface FastEthernet5/0
no ip address
shutdown
!
ip classless
ip route 10.9.9.0 255.255.255.0 172.16.48.2 //--> Routing Static yang baru kita buat
!
!
!
!
line con 0
password mal // --> Password ketika masuk console
login
line vty 0 4
login
!
!
end
=============================================

Selanjutnya kita coba koneksi dari LAN1 ke LAN2, kalo tidak ada kesalahan di configurasi maka dari LAN1 ke LAN2 saat kita coba ping akan reply,,

Tes koneksi dari salah satu host LAN1 ke LAN2
=============================================

PC>ping 10.9.9.10

Pinging 10.8.8.10 with 32 bytes of data:

Reply from 10.8.8.10: bytes=32 time=19ms TTL=126
Reply from 10.8.8.10: bytes=32 time=26ms TTL=126
Reply from 10.8.8.10: bytes=32 time=29ms TTL=126
Reply from 10.8.8.10: bytes=32 time=34ms TTL=126

Ping statistics for 10.8.8.10:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 19ms, Maximum = 34ms, Average = 27ms
===============================================

Ping reply, itu artinya Routing Static kita sudah berhasil

To be Continue >>> Config Router Cisco episode 3

Created By : Ikmal Q. Ilyas